Black electrophoresis paint for the Motorcycle and the parts
Product Introduction :
HR-4000BLB/HR-6000 the bottom of one black cathode electrophoretic
coating, is HLS Paint (Shanghai) Co., Ltd., the eighth generation
of independent research and development of electrophoretic coating.
|
This coating by epoxy acrylate modified, the film also has
excellent corrosion resistance and weatherability, smooth
appearance and full, suitable as a base topcoat system. In
addition, the lead, cadmium, chromium, mercury and other heavy
metals, two-component, water dispersible resin, at the same time,
previous generations of the product characteristics, have good
adaptability to the galvanized steel, almost can be applied to all
metal coating,
such as: cold hot rolled steel, galvanized steel, aluminum, zinc
Aluminum Alloy plate, stainless steel plate. |
This product features shown below:
1,The appearance of the coating is flat, delicate, smooth.
2,Good stability of bath can adaptable for a longer updating cycle.
etc
Main ingredients
Matrix resin: Acrylic modified epoxy resin
| Curing agent: Fully enclosed multi isocyanate |
Bath on site management project
Good bath data and coating quality, from the strict parameters
management and maintenance of equipment, production line according
to its own reality time situation, can have different management
project and specifications, recommend the construction parameters
see the table below for reference:
| Classification | Project | Control Data | Testing frequency |
| New bath | Anolyte |
| Electrophoresis tank | Ratio | 1:(6-8) | -- | |
| Ripening time | 24-48 | -- | |
| Solid ( 120 ℃ /1h ,% ) | 15±5 | -- | once a day |
| PH | 5.4-6.0 | 2.0-3.5 | once a day |
| Conductivity ( μs/cm ) | 1000±500 | 1400±900 | once a day |
| P/B | 0.08-0.15 | once a week |
| L panel | Smooth horizontal plane and vertical plane without obvious
differences | once a week |
| Solvent content (%) | 0.5-1.8 | once a week |
| Liquid level Fall head (cm ) | 10-15 | once a day |
| ED voltage( V ) | 0-300 | once a day |
| Break voltage ( V ) | ≥350 | once a week |
| Bath temperature ( ℃ ) | 28-35 | once a day |
| ED time( S ) | 60~180 | once a day |
| UF － 1 Tank | Solid content (%) | ≤2.0 | once a day |
| UF － 2 Tank | Solid content (%) | ≤0.8 | once a day |
| Baking furnace | Provisions furnace temperature( ℃ ) | 170-190 | once a day |
| Curing conditions | Drying temperature |
(165-185)℃×(20-30)min (With content holding time) | once a day |
Construction equipment:
Cathodic electrophoretic coating construction in the
electrophoresis tank, so need to have the following equipment:
Electrophoresis tank
Circulation devices (including filter, fill the paint device)
DI water equipment
DC power supply and the power supply unit
Anode box (tube) and circulation device
Ultrafiltration device
Cleaning devices
Heat exchanging equipment
Curing device
