High weatherability colorful electrophoretic paint with Uv
radiation resiistance
Product Introduction :
HS-6060LB Color Epoxy acrylic Electrocoat for auto is a new
generation electrophoretic coating researched and developed by HLS
Paint (Shanghai) Co., Ltd.
|
It represents modern technology of cathodic electrophoretic coating
that is environment-friendly with high property and low cost. Such
coating does not contain heavy metal like lead, tin, cadmium and
mercury etc. It is a two-component, water-dispersed
resin,meanwhile, it took in features of previous products, and can
adapt galvanized steel sheet perfectly, almost can be applied to
foundation coating of all metal such as: cold and hot rolled steel sheet, aluminum products, and
stainless steel sheet etc. It is widely used in the electrophoresis
coating of spring, hardware, home appliance, stationery, auto
parts, electric car, groove pipe fittings etc
|
This product features shown below :
The appearance of the coating is flat, delicate, smooth, uniform
high gloss
| Good stability of bath can adaptable for a longer updating cycle |
The bath has strong anti-shrinkage and anti-pollution ability
| Coating fullness of good, better substrate hiding |
Main ingredients :
1,Curing agent: totally enclosed multi-isocyanates
2,Solvent: alcohol ether
3,Pigment: Titanium pigment, Organic pigment, kaolin, antirust
pigment
Filling tank proportion and method :
⑴ Bath preparation
Ratio:
Resin 1400.00
Paste 233.00-175.00
DI water 1785.00
Total 3418.00-3360.00
⑵ Ripening conditions
Sample quantity: 3000～3500g
Container: 5L (Diameter 16cm)
Tank temperature:28-30 ℃
Time: 24～48Hr
Mixed conditions: impeller diameter 8cm (speed 200rpm)
(3) Coating conditions
Experimental panel: phosphated cold-rolled steel plate
Tank temperature: 28-35℃
Pole ratio: A/C = 1/2 ~ 1/4
Distance of electrodes: 15cm
ED time: For full immersing 1-3 minutes ( 20 seconds soft start)
Baking conditions:(165-185)℃×(20-30)min (Keeping temperature of
parts coated)
Construction equipment
Cathodic electrophoretic coating construction in the
electrophoresis tank, so need to have the following equipment:
Electrophoresis tank
Circulation devices (including filter, fill the paint device)
DI water equipment
DC power supply and the power supply unit
Anode box (tube) and circulation device
Ultrafiltration device
Cleaning devices
Heat exchanging equipment
Curing device
