Special color electrophoretic paint for toolbox cabinet
Product Introduction :
HR-4000LB Epoxy acrylic Color Cationic Electrocoat is HLS Paint
(Shanghai) Co., Ltd., the eighth generation of independent research
and development of electrophoretic coating. This coating by epoxy
acrylate modified, the film also has excellent corrosion resistance
and weatherability, smooth appearance and full, suitable as a base
topcoat system. In addition, the lead, cadmium, chromium, mercury
and other heavy metals, two-component, water dispersible resin, at
the same time, previous generations of the product characteristics,
have good adaptability to the galvanized steel, almost can be
applied to all metal coating, such as: cold hot rolled steel,
galvanized steel, aluminum, zinc Aluminum Alloy plate, stainless
steel plate.
This product features shown below :
1,The bath has strong anti-shrinkage and anti-pollution ability
2,Good stability of bath can adaptable for a longer updating cycle
3,Coating fullness of good, better substrate hiding
4,Strong anti-corrosion properties
Main ingredients:
Matrix resin: acrylic modified epoxy resin
| Curing agent: totally enclosed multi-isocyanates |
Additives: surface active agent, prevent shrinkage cavity agent
| Pigment: Titanium pigment, Organic pigment, kaolin, antirust
pigment |
Product quality data :
| Project | Technical data | Test standard |
| Resin (HS-6060LB) | Color Paste |
| pH | 25℃ | 6.0±1.0 | —— | GB/T 9724 |
| Conductivity | 25℃, μs/cm | 1300±400 | —— | HG/T 3334 |
| Appearance | —— | Milky white liquid | viscous liquid,no agglomeration | Visual |
| Storage stability |
No stratified state, and there were no obvious difference compared
to before storage | In 5-35 ℃ temperature 1 year |
Note: pH, conductivity measurement in the resin/pure water = 1:1
dilution
Storage, packaging and transportation :
This product is a water-borne industrial coatings, non-hazardous,
non-inflammable and explosive products; transportation to prevent
direct sunlight, avoid freezing (>5℃ ); Packaging for 50/60/200L
Plastic barrel; in the transport and storage of drums should be
maintained clean, avoid charging the dirt brought in on drums
during filling tank, again checked and confirmed that the quality
of products, including paste resin, emulsions and additives should
be indoor storage, good ventilation, dry, protect against freezing
and overheating, the storage temperature should be controlled at
5～35℃, products from the date of production, over shelf,
experimentation is required to determine whether can continue to
use.
If you want to learn more about HLS coating products, please
contact Sales Department of Shanghai HLS now
Customers in the colorful industry :
