Home air conditioner Water - Borne Electrophoretic Coating
Product Introduction
HS-5400LB/HS-5400 White epoxy acrylic cathodic electrophoretic
coating for auto is the 8th generation electrophoretic coating
researched and developed by HLS Paint (Shanghai) Co., Ltd. in
cooperation with Germany HS International Chemical Industry
Group,and get the national invention patent and the Shanghai
science and technology commission of high-tech transformation
project.
It represents modern technology of cathodic electrophoretic coating
that is environment-friendly with high property and low cost. Such
coating does not contain heavy metal like lead, tin, cadmium and
mercury etc. It is a two-component, water-dispersed resin. The
coating that does not contain tin element meet the latest
environ-mental regulations of European Union, North America, Japan
and other requirements in advance, which is the inevitable trend of
future environ-mental coating and low cost; meanwhile, it took in
features of previous products, and can adapt galvanized steel sheet
perfectly, almost can be applied to foundation coating of all
metal, such as: cold and hot rolled steel sheet, galvanized steel
sheet, aluminum products, zinc-aluminum alloy sheet and stainless
steel sheet etc.
This product features shown below:
Low curing temperature, coating yellow degeneration resistance is
good, suitable for electrodeposition primer, and then to spray or
paint coating process, such as: oil heater, radiator, heater, lamps
and lanterns, machinery, home appliances and hardware products and
other industries
Main ingredients:
| Neutralizing agent | organic acid |
| Pigment | titanium dioxide, kaolin,antirust pigment |
| Additives | surface active agent, prevent shrinkage cavity agent,resistance to
yellowing agent |
Filling tank proportion and method
| Bath preparation | Ripening conditions | Coating conditions |
| Resin:800.00-1000.00 | Sample quantity: 3000-3200g | Experimental panel: phosphated cold-rolled steel plate |
| Paste:800.00-1000.00 | Container: 5L (Diameter 16cm) | Tank temperature: 30±2℃ |
| DI water:2000 | Tank temperature:30 ±2℃ | Pole ratio: A/C = 1/2 ~ 1/4 |
| Total 3:3000.00-3200.00 | Time: 24～48Hr | Distance of electrodes: 15cm
ED time: For full immersing 1-3 minutes ( 20 seconds soft start) |
| | Mixed conditions: impeller diameter 8cm (speed 200rpm)
| ED time: For full immersing 1-3 minutes ( 20 seconds soft start)
|
| | | Baking conditions:(150-170)℃×(20-30)min (Keeping temperature of
parts coated) |
Bath on site management project :
Good bath data and coating quality, from the strict parameters
management and maintenance of equipment, production line according
to its own reality time situation, can have different management
project and specifications, recommend the construction parameters
see the table below for reference:
| Classification | Project | Control Data | Testing frequency |
| New bath | Anolyte |
| Electrophoresis tank | Ratio | 1:(4-5) | -- | |
| Ripening time | 24-48 | -- | |
| Solid ( 120 ℃ /1h ,% ) | 12±2 | -- | once a day |
| PH | 5.3-5.8 | 2.0-3.5 | once a day |
| Conductivity ( μs/cm ) | 900±400 | 1000±500 | once a day |
| P/B | 0.35-0.45 | once a week |
| Solvent content (%) | 1.2-2.0 | once a week |
| Liquid level Fall head (cm ) | 10-15 | once a day |
| ED voltage( V ) | 0-300 | once a day |
| Break voltage ( V ) | ≥350 | once a week |
| Bath temperature ( ℃ ) | 30±2 | once a day |
| ED time( S ) | 60~180 | once a day |
| UF － 1 Tank | Solid content (%) | ≤2.0 | once a day |
| UF － 2 Tank | Solid content (%) | ≤0.8 | once a day |
| Baking furnace | Provisions furnace temperature( ℃ ) | 150-170 | once a day |
| Curing conditions | Drying temperature |
(150-170) ℃ x (15-20)min (With content holding time) | once a day |
Customer production site :
FAQ
1.Are you the real manufacturer?
Yes. We are manufacturer with 24 powder coating production lines
and related quality testing equipment.
2.What kinds of powder coatings do you manufacture?
Thermosetting powders including polyester powders and epoxy
polyester powders.
3.What certifications do you have?
ISO9001:2015, ROHS, NSF,WRAS, MSDS
4.What industries are your products used in?
Our powder coatings are widely usd in metal spraying.
General industrial series - indoor and outdoor furniture, lighting,
sports equipment, beach chairs, racks, display racks, baby
carriages,etc
Aluminum series - aluminum profiles, aluminum curtain wall,
aluminum panels, aluminum doors and Windows, railway accessories,
highway guardrail, aluminum ceiling, etc
Doors; Agricultural machinery; Pipeline anticorrision; Household
appliances; Auto parts etc.
5.About OEM:
Welcome, you can send your own LOGO, we can print or emboss any
LOGO for you.
6.About Warranty:
We are very confident in our products, and we pack them very well
in seaworthy packagings, so you will
receive your order in good condition.
7.For more questions pls email me or chat with me online directly.
Mobile/Wechat/Whatsapp:0086 150 2015 1189 Kevin
